Docsity
Docsity

Prepare for your exams
Prepare for your exams

Study with the several resources on Docsity


Earn points to download
Earn points to download

Earn points by helping other students or get them with a premium plan


Guidelines and tips
Guidelines and tips

OSHA 510 Exam 2025 questions and answers already passed/ Graded A+, Exams of Public Health

OSHA 510 Exam 2025 questions and answers already passed/ Graded A+ OSHA 510 Exam 2025 questions and answers already passed/ Graded A+

Typology: Exams

2024/2025

Available from 02/01/2025

amazinggrace1
amazinggrace1 🇺🇸

5

(3)

249 documents

1 / 15

Toggle sidebar

This page cannot be seen from the preview

Don't miss anything!

bg1
OSHA 510 Exam 2025 questions and answers already passed/
Graded A+
OSHA stands for - ✔✔Occupational Safety and Health Administration
OSHA's focus four injuries are: - ✔✔1. fall
caught-in
struck by
electrical
OSHA's mission is to and . - ✔✔save lives and prevent injuries
OSHA's primary method of enforcement of safety regulations is through . - ✔✔worksite
inspections
OSHA was formed because were increasing. - ✔✔injuries and illnesses
OSHA was signed into law by President in December of . - ✔✔Nixon; 1970
In the correct order, what is OSHA's inspection priority? - ✔✔1. imminent danger
fatality or hospitalization
worker complaints/referrals
pf3
pf4
pf5
pf8
pf9
pfa
pfd
pfe
pff

Partial preview of the text

Download OSHA 510 Exam 2025 questions and answers already passed/ Graded A+ and more Exams Public Health in PDF only on Docsity!

OSHA 510 Exam 2025 questions and answers already passed/

Graded A+

OSHA stands for - ✔✔Occupational Safety and Health Administration OSHA's focus four injuries are: - ✔✔1. fall caught-in struck by electrical OSHA's mission is to and. - ✔✔save lives and prevent injuries OSHA's primary method of enforcement of safety regulations is through. - ✔✔worksite inspections OSHA was formed because were increasing. - ✔✔injuries and illnesses OSHA was signed into law by President in December of. - ✔✔Nixon; 1970 In the correct order, what is OSHA's inspection priority? - ✔✔1. imminent danger fatality or hospitalization worker complaints/referrals

targeted inspections follow-up inspection The four types of OSHA citations and dollar amounts of fines are: - ✔✔1. Willful up to $134, Serious up to $13, Other-than-serious up to $13, Repeated up to $134, PPE stands for - ✔✔Person Protective Equipment The effects of workplace injuries and illnesses include - ✔✔a. lower morale increased costs to retain workers slower production rates higher turnover increased worker's compensation rates OSHA standards are found in the - ✔✔title 29 labor CFR Part contains record keeping standards - ✔✔ 1904 Part contains general industry standards. - ✔✔ 1910

An example of indirect cost is - ✔✔a. loss of efficiency by breakup of crew b. lost time by supervisor c. cost of breaking in new worker What is determined by the company's own record of accidents and losses? - ✔✔Experience Modification Rate EMR equation - ✔✔ACTUAL losses / EXPECTED losses OSHA defines an excavation as any cut, cavity, trench, or depression in the earth's surface formed by earth removal - ✔✔man-made At trench is defined as a narrow underground excavation that is than it is wide - ✔✔deeper A trench cannot be wider than - ✔✔ 15 feet Cave-in protection is required for all excavations greater than - ✔✔ 5 feet in depth unless they are entirely in sold stable rock A ladder must be provided every - ✔✔ 25 feet for excavations greater than 4 feet in depth Spoil piles, material and equipment must be kept - ✔✔ 2 feet from the excavation

Excavation inspections must be conducted - ✔✔DAILY and before start of work Excavation inspections must be conducted to determine - ✔✔soil classification For all trenches deeper than 5 feet, OSHA requires what to protect workers from cave-in? - ✔✔a. sloping shoring benching shielding Stable rock - ✔✔natural solid mineral material than can be excavated with vertical sides Type A: cohesive soils with an unconfined compressive strength of tons per square foot - ✔✔1.5 tons Type B: cohesive soils with an unconfined compressive strength greater than tsf but less than tsf - ✔✔0.5; 1. Type C: cohesive soils with an unconfined compressive strength of tsf or less - ✔✔0.5 tsf

Incident Rates allow for a comparative level of injuries and illnesses among different , , and. - ✔✔industries, organizations, or operations The formula for incident rates is - ✔✔# incidents x 200,000 / employee hours worked TRIR - ✔✔Total Recordable Incident Rate DART - ✔✔Days Away Restricted Transferred Three parts of an OSHA inspection are - ✔✔1. Opening conference Worksite "Walk-around" Closing Conference Opening conference - ✔✔brief meeting during which the OSHA inspector will explain the purpose of the inspection Worksite "Walk-around" - ✔✔walk around and see if there are any inspections; might take pictures and notes during the inspection Closing conference - ✔✔the inspector will disclose any hazards or violations identified during the course of the inspector, as well as any possible violations the organization may face; citations and fines are not discussed

Only companies may have a focused OSHA inspection. - ✔✔construction When the OSHA CSHO arrives at a site to conduct a focused inspection, they will determine: - ✔✔1. whether there is a project coordination by the general contractor review the projects safety and health program for adequacy determine if there is a competent person If the CSHO does not find that a company qualifies for a focused inspection, they will receive a inspection - ✔✔comprehensive General Duty Clause - ✔✔shall furnish to each of his employees' employment and a place of employment which are free from recognized hazards that are causing or are likely to cause death or serious physical harm to his employees The purpose of an OSHA compliance directive (CPL) is to insure - ✔✔consistent enforcement of OSHA regulations the four types of and definitions of employers in a multi-employer situation are - ✔✔1. creating employer exposing employer correcting controlling

A safety audit is in nature while inspections are - ✔✔quantitative; qualitative An audit compares actual performance to a - ✔✔set standard OSHA record keeping requirements are contained in 29 CFR , which is a horizontal standard applying to companies regulated by OSHA. - ✔✔1904; general industry Businesses regulated by OSHA may be exempt from these standards for two reasons, or

. - ✔✔size or industry type Companies cannot employ over employees at any point during the calendar year to claim the size exemption. - ✔✔ 10 Companies must have a risk SIC or NAICS code to claim the type exemption. - ✔✔high Regardless of exemptions, ALL companies must report the following to OSHA: - ✔✔a. Fatalities within 8 hours Hospitalizations within 24 hours Amputations within 24 hours Loss of eye within 24 hours

An employer must report any employee even if not on your payroll if you them on a day- to- day basis. - ✔✔supervise OSHA Form 301 is the - ✔✔Injury and Illness Report OSHA Form 300 is the Log of. - ✔✔Work-Related Injuries and Illnesses OSHA Form 300A is the annual of Work-Related Injuries and Illnesses. - ✔✔summary Form 301 and 300 must be filled out within days of. - ✔✔7; receiving information that a recordable case has occurred. The OSHA 300A must be certified by a company executive and posted in a prominent location from

. - ✔✔February 1st to April 30th All records must be maintained for years. - ✔✔ 5 A PLHCP is ✔✔physician or other licensed health care professional For a count of days on OSHA forms, ALL calendar days are counted starting the day the injury takes place with a cap of days. - ✔✔after; 180

Whenever practicable, all arc welding and cutting operations shall be to protect employees and other persons working in the vicinity. - ✔✔shielded Failure to inspect for oil or grease on regulator fittings, valves, or the cap threads on a cylinder of oxygen can result in - ✔✔fire or explosion An "Assured equipment grounding conductor program" deals with the cord-set and receptacles which are not part of the - ✔✔building's permanent writing is the maximum voltage before guarding is required against accidental contact by cabinets, other forms of enclosures, or by location in a room or enclosure accessible only to qualified persons (electricians). - ✔✔50 volts or greater The practice of connecting two metallic objects to prevent static sparks is called. - ✔✔bonding Before the start of any work covered under Subpart V - Power Transmission and Distribution,

  • ✔✔existing conditions are determined by an inspection or a test Eye and face protection equipment used to protect against hazards shall meet the requirements specified in. - ✔✔

Respirators used in the construction industry are covered under OSHA standard 1910.. - ✔✔ Accident prevention signs such as; danger, caution and exit signs shall be when work is being performed. - ✔✔ A material chute used during demolition operations must be enclosed when its angle is equal to or greater than from the horizontal. - ✔✔45 degrees is the trigger height when the masonry walls must be braced? - ✔✔over 8 feet When a masonry wall is being constructed, a limited access zone at least the height of the wall plus a minimum of feet tall shall be established on the side of the wall without scaffolding. - ✔✔ Except for extra-heavy-duty metal or plastic portable ladders, all portable ladders must support the maximum intended load. - ✔✔ 4 times Portable ladders with structural defects such as, broken or missing rungs or split rails shall be from service until repaired. - ✔✔removed According to OSHA, portable containers used to provide drinking water shall be tightly and equipped with a. - ✔✔