Docsity
Docsity

Prepare for your exams
Prepare for your exams

Study with the several resources on Docsity


Earn points to download
Earn points to download

Earn points by helping other students or get them with a premium plan


Guidelines and tips
Guidelines and tips

M240 Machine Gun Operator Training and Exam, Exams of Nursing

Detailed information on the m240 medium machine gun, including its proper handling, safety rules, components, cycle of operations, maintenance, and troubleshooting. It covers a wide range of topics related to the operation and maintenance of the m240 machine gun, such as weapon handling responsibilities, safety rules, weapon condition codes, component identification, cycle of operations, cleaning and maintenance procedures, and troubleshooting. A training manual or exam guide for censecfor (center for security forces) personnel who operate the m240 machine gun. The comprehensive coverage of the m240 system and the emphasis on safety and proper handling make this document a valuable resource for anyone involved in the operation and maintenance of this weapon system.

Typology: Exams

2023/2024

Available from 08/13/2024

clevelsky
clevelsky 🇺🇸

22 documents

1 / 6

Toggle sidebar

This page cannot be seen from the preview

Don't miss anything!

bg1
CENSECFOR OPERATOR TRAINING -
M240 MACHINE GUN EXAM 2024/2025
Proper weapon handling is whose responsibility? - Precise Answer
✔✔The person in control of the weapon
Pointing or aiming a functional weapon at any person or thing is
unlawful except when? - Precise Answer ✔✔When required in the
performance of duty
A weapon's readiness to fire and its corresponding safety status are
described using one of how many numbered Weapon Condition Codes?
- Precise Answer ✔✔4
The most prevalent factor in accidents involving firearms is which of the
following? - Precise Answer ✔✔Assumption that the weapon is not
loaded
To minimize the risk of firing any weapon negligently and reinforce
positive identification is the rationale for which of the below safety
rules? - Precise Answer ✔✔Rule 3. Keep your finger straight and off the
trigger until ready to fire
To prevent unintentional injury to personnel or damage to properly that
could occur when handling or transferring possession of a weapon is the
pf3
pf4
pf5

Partial preview of the text

Download M240 Machine Gun Operator Training and Exam and more Exams Nursing in PDF only on Docsity!

CENSECFOR OPERATOR TRAINING -

M240 MACHINE GUN EXAM 2024/

Proper weapon handling is whose responsibility? - Precise Answer ✔✔The person in control of the weapon Pointing or aiming a functional weapon at any person or thing is unlawful except when? - Precise Answer ✔✔When required in the performance of duty A weapon's readiness to fire and its corresponding safety status are described using one of how many numbered Weapon Condition Codes?

  • Precise Answer ✔✔ 4 The most prevalent factor in accidents involving firearms is which of the following? - Precise Answer ✔✔Assumption that the weapon is not loaded To minimize the risk of firing any weapon negligently and reinforce positive identification is the rationale for which of the below safety rules? - Precise Answer ✔✔Rule 3. Keep your finger straight and off the trigger until ready to fire To prevent unintentional injury to personnel or damage to properly that could occur when handling or transferring possession of a weapon is the

rationale for which of the below safety rules? - Precise Answer ✔✔Rule

  1. Treat every weapon as if were loaded What is the life expectancy of the M240 medium machine gun? - Precise Answer ✔✔25, What is the maximum range of the M240 medium machine gun? - Precise Answer ✔✔4,074 yds What is the cyclic rate of fire for the M240 medium machine gun? - Precise Answer ✔✔650 to 950 rds/min The M240 medium machine gun has how many major common components? - Precise Answer ✔✔ 8 Which major component houses cartridges for firing and directing projectiles? - Precise Answer ✔✔Barrel Assembly Which major component provides feeding, stripping, and chambering of cartridges using projectile propelling gas for power? - Precise Answer ✔✔Bolt and Operating Rod Assembly The M240 medium machine gun has how many steps in the cycle of operations? - Precise Answer ✔✔ 8

Which machine gun mount provides a support structure for training, elevating, aiming, and controlling of two installed 7.62 mm M240B, G, or N Machine Guns? - Precise Answer ✔✔MK 99 MOD 1 During the installation of the ammunition can on the MK 93 Mod 2, after you insert headed pins into retaining holes. You should apply moderate ___ pressure until seated - Precise Answer ✔✔Downward When conducting and Elevation, Depression, and Training check of a mount you should ensure the field of fire clears fixed structure with what minimum clearance? - Precise Answer ✔✔6 Inches During the installation of the MK 99 Mod 1, ammunition cans should be installed at what angle? - Precise Answer ✔✔45 Degrees How many different types of train stops are there available for M mounts? - Precise Answer ✔✔ 2 How many types of mounting configurations are authorized for use with Crew Served Weapons? - Precise Answer ✔✔ 2 The two types of authorized mounting configurations for Crew Served Weapons are ___ and ___ - Precise Answer ✔✔MK 16 Mod 8 Stands / Bracket and Lock

After successfully verifying field of fire on an adjustable train stop you should secure adjustable train stop lugs with a ___ - Precise Answer ✔✔Lock wire Elevation stops are available on which of the following Crew Served Weapons Mounts ___ and ___ - Precise Answer ✔✔MK 93/MK 99 If a gun barrel reflector or borescope is not available for use you can sight down the barrel from ___ the Crew Served Weapon - Precise Answer ✔✔Directly behind Ammunition on the feed tray, chamber is empty, bolt is rear, safety on SAFE, cover closed is which Weapon Condition Code? - Precise Answer ✔✔Condition 1 Which is the only authorized installable train stop MK 16 MOD 8 assemblies? - Precise Answer ✔✔Adjustable Stop A mounted CSW system must have a minimum clearance of ___ is provided from obstructions? - Precise Answer ✔✔6 inches When adjusting the Bracket and Lock Assembly, you should raise and rotate Crew Served Weapon until mount stop engagement lug rides on top of ___ to mark safe fields of fire - Precise Answer ✔✔Stop plate