Download Army Explosive Safety Familiarization Questions with Answers Updated 2024. and more Exams Safety and Fire Engineering in PDF only on Docsity!
Army Explosive Safety Familiarization
Questions with Answers Updated 2024.
What type of detonation occurs when a storage facility with high explosives detonates and its shock wave hits a nearby facility causing another explosion? - Correct answer Deflagrate detonation Which of the following chemicals will react violently when it comes in contact with water? - Correct answer TH, HC, TPA Select the correct order of the levels of protection from least protection required to most protection required. - Correct answer IMD, ILD, PTRD, IBD The ultimate purpose of quantity distance is? - Correct answer Protecting personnel, equipment, and buildings from accidental explosions. The magazine below contains 11,000 lb of NEW. The maximum NEW it can hold is 13,000 lb. How many additional pallets of ammo can be placed in the facility? Use the Yellow Book if needed. - Correct answer 3 pallets If a pallet holds 12 HE rounds and each round contains 17.5 lb of NEW, what would be the NEW of the pallet? 140 lb - Correct answer 210 Select the division of Hazard Class 1 that is the most dangerous. - Correct answer 1.
Determine the hazard class and division of this pallet. Use the Yellow Book if needed. (D533) - Correct answer 1.3C Why are there divisions within Class 1? - Correct answer specific hazards posed Cardinal Rule for safety - Correct answer people, explosives, time Which of the following statements describe an SOP? - Correct answer available in all work areas Who is responsible for the risk management process? - Correct answer everyone Which statement does NOT apply to evaluating ammo procedures with the risk management (RM) process? - Correct answer To help workers understand how the RM process replaces the SOP Which of the following safety guidelines is NOT correct? - Correct answer Heat sealing equipment should be left on so it is ready when you need to use it. Which of the following safety guidelines is NOT correct? 1 - Correct answer You should make sure MHE has a fire extinguisher with a minimum rating of 5BC. Which of the following safety guidelines is NOT correct? 2 - Correct answer You cannot choose tools other than those listed in your SOP if it will make your job easier.
ECM - Correct answer igloo or bunker, steel and earth covered, preferred storage, vents, What are the characteristics of an AGM? - Correct answer fireproof, less protective, larger than ECM Which statements about magazine operations are correct? - Correct answer follow inside/outside instructions, clear path, unlocked when inside Which operation is NOT allowed inside a magazine? - Correct answer air testing You have asked these workers why it is important to keep non-compatible ammo separated. Which one gave the correct response? - Correct answer hazards Given three groups, C, D, and F, and one location, use the storage compatibility chart to determine if they are compatible for storage. - Correct answer written approval (F=z) Which statement about shaped charges is false? - Correct answer face the front wall in an ECM Which statement about pyrotechnics is false? - Correct answer Wet or damp pyrotechnic materials can be safely stored. On-Post Transportation - Correct answer 10BC, non spark, maintenance checks daily, placards placed with fire symbols, DD626, storage compatibility
Off-Post - Correct answer DD 626, placards without fire symbols, 10BC Which parts of the train are most sensitive? - Correct answer fuze and primer A shock wave is created when - Correct answer greater than speed of sound PPE for WP - Correct answer protective mask, fire resistant gloves and overalls. A barrel of water must be available to submerge leaking ammo. Which explosive train is used to propel (launch) the projectile? - Correct answer low explosive train Select the terms that describe the effects of a high explosive. - Correct answer slower than sound, shock wave, detonation IBD and PTRD - Correct answer protects people Which section requires an operator's signature to verify the operator has read and understands the SOP? - Correct answer operator's statement Once a hazard is identified, what two elements are considered to assess the hazard? - Correct answer probability and severity Which statement about demil operations is false? - Correct answer Debris from the range is considered inert and does not require any documentation before it is turned in.
